• Fouling factors are no longer a problem. The Heat Exchanger is always clean
  
  
• Drastic reduction in production losses because there is no wasted time cleaning the heat exchanger
  
  
• The overall heat transfer coefficient is very high as the level of mixing is dynamically increased and fouling is eliminated
  
  
• Reduction in the heat transfer surface and therefore a reduction in the cost of the unit with less materials
  
  
• The heat exchanger is self draining allowing total product recovery
  
  
• The size of the installation is much less than traditional solutions
  
  
• Reduction in product volume contained within the heat exchanger
  
  
• Easy maintenance. No rotary moving parts, seals, etc
  
  
• The temperature difference between the product and service fluids
  
  
• The design of the heat exchanger allows hygienic or industrial construction
  
  
• The Unicus^® allows for gentle product handling since the shaft is moved back and forth once every six seconds and can be slowed down even further if required.
  
  
• Since moving the shaft back and forth over a small length uses relatively little energy the UNICUS^® has low power consumption, making it very cost-effective to run.
  
  
• A variety of scraper blades are available so the blade can be matched to the product.
  
  
• Due to the patented self cleaning device the product channels are always clean so the unit works in the optimum condition for heat transfer at all times.
  
  
• The UNICUS^® is simple and economical to maintain.
  
  
• As the scraper blades support the central shaft it is possible to make the heat exchange length as long as is required, with six metre long units built regularly as standard.
  
  
• With the UNICUS^® it is possible to put multiple product tubes in the shell making it even more compact.